NEWPORT MVN50 精密滾珠軸承垂直線性位移臺 現(xiàn)貨出售

NEWPORT MVN50 精密滾珠軸承垂直線性位移臺 現(xiàn)貨出售

行程范圍 8 mm  
負載 60 N  
螺紋類型 4-40 and 1/4-20
小高度 52.1 mm  
大高度 60.1 mm  
平臺尺寸 50 x 50 mm
材料 Alloy Steel
軸承 Ball Bearing
位移軸 Z
驅動位置 Center drive
推薦促動器 DM11-16 or BM11.16
重量 0.8 kg  
推薦的BM 系列測微頭 BM11.16
推薦的DM差分式測微頭 DM11-16

The MVN50 Precision Ball Bearing Vertical Linear Stage provides precise 0.31 inch manual height control with micron-scale sensitivity. Its high load capacity makes it especially suited to vertical positioning of heavy payloads. The stage utilizes an inclined plane design consisting of two precision-machined, opposing wedge blocks. Horizontal translation of the lower wedge is transformed into vertical motion of the upper wedge by means of inclined ball races. For linear, backlash-free travel, ball races are fabricated from precision-ground tool steel and are pre-loaded by a spring. A rotation of one division on the micrometer scale corresponds to a vertical displacement of half the linear displacement distance, thereby doubling the sensitivity. Manual positioning sensitivity can be approximately 50 nm using the DM series of differential micrometers. This stage has a large mounting platform that incorporates an array of tapped English mounting holes for the convenient attachment of components. Actuators are sold separately. Please note the Minimum and Maximum Height specs below include a 6-mm thickness of the M-PBN5 base plate which is sold separately.